Biomek 96 well plating

Open FIVTools and click "Layouts."

Edit "Exp Name" to the correct FIV Number (make sure to keep "FIV" in the name)

1. Click once on the “Export Folder” bar so it updates the location

Choose the desired number of 96-well plates by typing 1, 2, 3, or 4 in "Count."

1. Select “96 Mote” to exclude plating from the outermost wells

2. Select “384 Full” for a 384 well plate

3. If the layout is not standard, adjust the “First Row”, “First Column”, “Last Row”, and “Last Column” boxes appropriately

4. If doing an antibody plate, check the “Ab Plate” box and: - Make “Count” = 0 for one antibody plate

    - Make “Count” = 2 for two 96-well plates and an antibody plate
   

Change “Cells per Well” to desired plating density.

Copy experimental condition names (often genotypes, dosages, G1/G2, etc.) and click “PASTE Names” to auto-fill the 12-well source plate.

1. “Name” can also be manually filled
2. The “Well” column can only have row/column combinations of a 12-well plate (A-C, 1-4)
3. “Relative Representation” allows you to assign different weights for representation in the 96-well plates
4. Use the underscore symbol to have a cell type only show up in the antibody plate layout (for example: “_cell type”)

Click "Fill Plates"

1. Try to make sure the empty wells are not on any edges and if doing multiple plates that they cannot be flipped or rotated to the same location as another plate.

Go into the “4 Mapping” folder of the respective experiment and make sure there is a PlateMap, PlatingSetup, and script.

Find the correct method.

#尊敬的用户，由于网络监管政策的限制，部分内容暂时无法在本网站直接浏览。我们已经为您准备了相关原始数据和链接，感谢您的理解与支持。
https://lh6.googleusercontent.com/HnMxLRqNfl-ypu73WR5GTlbHrrMq3HkbSPyxENXGgfFJLXNIkY0crEwU-16xvVoiMR5-WhCVBj3CxQjaeUmkHM2x_4NgfOcnMiZRnOLDQpSLrcqVYJN91g7ka0--uQfY0YRmcJdmvPCJRVGhLZ1lK5g

The algorithm will look like this:

#尊敬的用户，由于网络监管政策的限制，部分内容暂时无法在本网站直接浏览。我们已经为您准备了相关原始数据和链接，感谢您的理解与支持。
https://lh6.googleusercontent.com/T7I2gz_xOhywpPjTif1wDWAnjFyL11RJw42wnvDm37ziWpzvvxZ5mN1jpwu1xR8IGJZueK_0WrNFiAGt-qyndEmaVP5WQ0sZwTWVFCz3pETDO3IqnIfwit3oynEwS4nMNscHVS2tWQaLrJnQxuctHAw

Set up the deck in the configuration shown

#尊敬的用户，由于网络监管政策的限制，部分内容暂时无法在本网站直接浏览。我们已经为您准备了相关原始数据和链接，感谢您的理解与支持。
https://lh4.googleusercontent.com/309kZQyL0uHcFMyizi3b1oeGLwAGf2tCiR_zGRoYnn-xOp5qwBnIGCakgVazgfiVBEtDBWVACnuMHudxCBi3YwOpRH1AKEPdEJZXtmGX0p1Gw48B0w0BRYPizgmTf-_qGJD0FLi6Rs5qPwufzfMZ8mY

Make sure the two tip rows closest to the front are full in the “tip_box” and the “empty_1” and “empty_2” are completely empty.

Only use the number of 96-well plates needed for your experiment and place them in order starting with “0.”

- Keep the lids on the plate until you are ready to begin the Biomek program.

Open the appropriate experiment folder, go to “4 Mapping” and open the “FIVXXX_script” file.

Copy the entire script.

Go to the “Scripted Let” step in the algorithm and paste your entire script.

- Scroll up to the top to make sure the correct experiment number and an appropriate time stamp are there

Go back to the “4 Mapping” folder and drag and drop the “FIVXXX_PlatingSetup” file onto and EXCEL sheet (DO NOT OPEN AS TEXT FILE).

After creating cell suspensions for each source condition and obtaining counts, input their counts into the appropriate positions of the “Cells/uL” column:

#尊敬的用户，由于网络监管政策的限制，部分内容暂时无法在本网站直接浏览。我们已经为您准备了相关原始数据和链接，感谢您的理解与支持。
https://lh5.googleusercontent.com/s6SJDFBgXdcJDNYwmaSOFwrny5M_ShNKcRnpZx1BKqIpsIBjnX8VXFo3mfhBF3AndQjIwNhIBFyl1y3qdVMk3xvWk1xjYxJezy153KUGo3NiMke_bdlXZ0aCmIMwZyd9Tlu5nN_LDTpfmIboG46VMAg

With a new 12-well plate, set up the Source Plate by adding the volumes in the “uL Media” and “uL Cells” columns into the appropriate wells:

#尊敬的用户，由于网络监管政策的限制，部分内容暂时无法在本网站直接浏览。我们已经为您准备了相关原始数据和链接，感谢您的理解与支持。
https://lh6.googleusercontent.com/mcwog27_JDZnN-kRw7hq4TzZKE0ErFQ_95oGJADvZx1UhCdPkWTr0MXTpVBaQ6UmZlTrjF943gmHxk5AnYMJHrluOp4NumBAP8DMsn4i5M2i1tbHfgkIaNYojdGKcY7dwDAxzHdY1tZTsuR8RmwV4p4

Place the Source Well in the correct position on the deck,open the lids to all plates, and close the front door.

Press “Run” (the green arrow) and confirm the configuration in the pop-up box.